Table of Contents
Advertisement
1.1 Installation requirements
Ensure that you have everything required to complete the installation:
•
PrintConnect device v3.0
•
PrintConnect Configuration Key, a 12-character alphanumeric string, found on a
label on the PrintConnect packaging and accessible via a connected PrintValet
keypad
•
PrintValet keypad v2.0 (included with your PrintConnect)
•
Ethernet network cable
•
your printer(s) and the required connectors/cabling
Note: You will also need the IP address of your printer(s) to successfully configure the
PrintConnect. For more information, see
•
(optional) USB flash drive for manual configuration of PrintConnect
Note: PrintConnect supports multiple printers but only one of these can be a USB-connected
printer.
1.2 The PrintConnect unit
Front:
Back:
Determining the IP address of your
PrinterOn PrintConnect Installation and Configuration Guide
Introduction
printer(s).
|
4
Advertisement
Table of Contents
