Dynojet Power Commander 3 Installation Instructions

Dynojet Power Commander 3 Installation Instructions

2002-2004 suzuki gsx 1400

Advertisement

2002-2004 Suzuki GSX 1400

Parts List

1
Power Commander
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned OFF before installation!
You can also download the Power Commander software
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i310-211
Installation Instructions
and latest maps from our web site at:
www.powercommander.com
2002-2004 Suzuki GSX 1400 - PCIII - 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Commander 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dynojet Power Commander 3

  • Page 1 You can also download the Power Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com i310-211 2002-2004 Suzuki GSX 1400 - PCIII - 1...
  • Page 2 Remove the seat. Remove the left hand side over. Disconnect the fuel injector con- nector shown in Fig. A. This connector is located on the left hand side of the bike just behind the airbox. Unplug this connector Plug the connectors from the Power Commander in line of these connectors.

Table of Contents