Advertisement
Quick Links
2000-2001 Honda CBR954RR
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i110-411
Installation Instructions
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
2002-2003 Honda CBR954RR - PCIII USB - 1
Advertisement
Related Manuals for Dynojet Power commander 3
Summary of Contents for Dynojet Power commander 3
- Page 1 Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com i110-411 2002-2003 Honda CBR954RR - PCIII USB - 1...
- Page 2 Remove the main seat. Open the passenger seat hatch. Connector from Power Remove the fuel tank mounting bolts. Commander III USB NOTE: The fuel tank does not need to be removed in order to install the PCIII. If you choose to remove the fuel tank to aid in the installation, then all fuel must be drained prior to disconnect- Connector from...
- Page 3 Route the PCIII and wiring under the rear seat subframe. Attach to inner fender below passenger seat using supplied velcro (Fig. D). 12) Reinstall main seat. i110-411 www.powercommander.com 2002-2003 Honda CBR954RR - PCIII USB - 3...
Need help?
Do you have a question about the Power commander 3 and is the answer not in the manual?
Questions and answers