WaterMaster
Electromagnetic flowmeter
4.6 Output Connections
Caution.
Refer to page 36 for output ratings.
Inductive loads must be suppressed or clamped to limit voltage swings.
Operation of outputs is programmable.
External isolators are not normally required as the pulse and alarm circuit is electrically separated
from all other WaterMaster connections.
4.6.1 Frequency Outputs
Terminal connection
IDs are HART- /
PROFIBUS-variant dependant
Fig. 4.13 Frequency Output Connections
Note. Outputs 1 and 2 are polarity sensitive. The common (negative) connection for these outputs is
designated 'COM'.
IM/WM–EN Rev. M
PLC or Datalogger
XX XX
XX XX 42
41 51 61
52
62
COM O/P1 O/P2
4 Electrical Installation
23