Introduction; Quality Control - ABB WaterMaster Manual

WaterMaster
Electromagnetic flowmeter

2 Introduction

WaterMaster™ is a range of high performance electromagnetic flowmeters for the measurement of
electrically conductive fluids and systems are normally supplied factory-configured and calibrated.
This User Guide provides installation, connection, security, start-up and basic setup details. For
programming and configuration information refer to the Programming Guide – IM/WMP.
Warning.

System configuration must be carried out only by users or personnel with approved access rights
(user privileges).

Read all relevant sections of this guide before configuring the system or modifying system
parameters.

Install and use associated equipment in accordance with the relevant national and local
standards.
This User Guide should be used in conjunction with the following publications:

Programming Guide – IM/WMP
For Profibus DP variants (FEX100-DP)

User Guide Supplement, PROFIBUS RS485 Physical Layer (FEX100-DP) – IM/WMPBS–EN

User Guide Supplement, PROFIBUS FEX100-DP Parameter Tables – IM/WMPBST–EN
For Modbus variants (FEX100-MB)

User Guide Supplement, MODBUS RS485 Physical Layer COI/FEX100/MOD–EN

User Guide Supplement, MODBUS Tables COI/FEX100/MOD/TBL–EN

2.1 Quality Control

The UKAS Calibration Laboratory No. 0255 is just one of the ten flow calibration plants operated by the
Company and is indicative of our dedication to quality and accuracy.
0255
Fig. 2.1 UKAS Calibration Laboratory No. 0255
4
2 Introduction
IM/WM–EN Rev. M