Table of Contents
Advertisement
User Manual—Version 3.0
CHAPTER 7:
OPTIONAL REPORT/RECEIPT PRINTER
INSTALLATION
The Epson TM-T811 thermal printer is utilized by the Tunnel Master
for both the report and receipt printer. These printers can be purchased as an
option to the base system or purchased and added to the system
after initial installation.
Please refer to the Operator's Manual supplied with the printer for proper
care and maintenance of your printer.
If you are using the Epson Dot Matrix printer, please be sure to check the DIP
switch settings of the printer. DSW1 DIP switch 3 should be the only DIP
switch set to ON all of the others should be off. The DIP switches are located
on the bottom of the printer. You will have to remove the small door
covering the DIP switches.
January 2016
Tunnel Master
Jr. Optional Report/Receipt Printer Installation
Jr. System
85
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Tunnel Master Jr and is the answer not in the manual?