Procedure For Dismantling The Inverter And Wiring Box - ABB PVS-100 Product Manual

P
rocedure for dismantling the Inverter and wiring box
Perform the steps for "Turning off the inverter" based on the model, before removing the
wiring box or the inverter itself.
Never open the wiring box in the case of rain, snow or a level of humidity >95%.
Always carefully seal all unused openings.
During dismantling always protect the inverter parts that are installed and exposed to the
IP66
weather elements!
The inverter consists of an power module
mounting bracket which may be dismantled separately.
03
To dismantling and disassemble the appliance, refer to the chapters:
Mounting with a support bracket
Follow the indications for the mounting procedure but in the reverse order
Even though the device is equipped with an anti-condensation valve,
air with extremely high levels of humidity can lead to the creation of
condensation inside the inverter.
As the inverter is almost completely insulated from the outside,
condensation can also form after maintenance interventions in certain
weather conditions.
- 160 -
8 - Maintenance
, a wiring box and a
01 02