AnyTone AT-D868UV Operating Manual page 30

9. MAIN MENU
Menu Exit Time
When you enter the menu, the transceiver remains in this menu for a while. After
that time the transceiver will automatically exit the menu. You can choose between
5 to 20 seconds of permanence.
Intro Display
• Picture: When you turn on the transceiver, the Anytone logo will be displayed.
• Character: When you start the transceiver, the text you have configured using
software will be displayed.
Main Ch
• Channel A: The channel that appears at the top of the LCD screen is set as the
main channel.
• Channel B: The channel that appears at the bottom of the LCD screen is establis-
hed as the main channel
These options are valid only if you have activated the subchannel display (Sub
Ch option).
Sub Ch
• Sub Ch ON: Activates the subchannel and the transceiver will show the two chan-
nels (main and secondary)
• Sub Ch OFF: Deactivate the subchannel and the transceiver will only show the
main channel.
Msg Note
You can select different types of alerts when you receive a new message.
Call Ring
You can select different types of alerts when you receive a new call.
Freq Step
You can select between these frequency steps: 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K,
30K y 50 KHz.
Ana Sq Level
Allows to adjust the level of the squelch to receive signals with different strength.
There are 5 levels available. This function is only valid for analog channels.
28
AT-D868UV Digital DMR & analog transceiver