Set Mode; Using The Set Mode; Set Mode Item List - Icom IC-410PRO Basic Manual

3

SET MODE

■ Using the Set mode

You can set seldom changed settings in the Set mode.
You can customize the transceiver settings to suit your
preference and operating style.
Example: Turning OFF the key beep
1) Enter the Set mode.
➥ Hold down [FUNC] for 2
seconds.
2) Select the "BEEP" menu.
➥ Push [FUNC] until the
"BEEP" menu as shown to
the right is displayed.
3) Turn OFF the key beep.
➥ Push [DOWN].
4) Exit the Set mode.
➥ Hold down [FUNC] for 2
seconds.
5

■ Set mode item list

The list on this basic manual shows the transceiver's Set
mode items.
See the ADVANCED MANUAL for each item's details. You
can download the ADVANCED MANUAL from the Icom
website, shown below.
http://www.icom.co.jp/world/support/download/manual/index.php
The transceiver's Set mode items may differ, depending on
the transceiver's setting. Ask your authorized Icom dealer or
transceiver administrator for details.
• Set mode items
Squelch Level "SQL"
Scan Mode "SCAN-M"
1
CTCSS/DTCS*
Backlight "LIGT"
Beep "BEEP"
Beep Level "BEPV"
RF Power "RFPOW"
Quiet Mode "QUIET"
Lockout "LOCK-O"
Roger Beep "RGR-B"
Battery Voltage "BATT"
1
* Selected CTCSS or DTCS code is displayed.
2
* 5 digit Own ID is displayed.
Auto Power OFF "AP-OFF"
Signal Moni "SMON"
Horn "HORN"
RX VFO "RX VFO"
Scan Stop Timer "S-TIME"
Scan Restart "SCAN-R"
Mic Gain "MIC"
Lone Worker "LONE"
AF Minimum Level "AFMIN"
2
Own ID*