Safety - THORLABS PM100D Operation Manuals

1.1 Safety

All statements regarding safety of operation and technical data in this
instruction manual will only apply when the unit is operated correctly.
The power meter PM100D must not be operated in explosion endan-
Sensor, photodiode and control inputs and outputs must only be
connected with duly shielded connection cables.
Only with written consent from Thorlabs may changes to single compo-
nents be carried out or components not supplied by Thorlabs be used.
Mobile telephones, cellular phones or other radio transmitters are
not to be used within the range of three meters of this unit since the
electromagnetic field intensity may then exceed the maximum
allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits
according to IEC 61326-1 for using connection cables shorter than 3
Attention
gered environments!
Do not remove covers!
Refer servicing to qualified personal!
Attention
meters (9.8 feet).
1.1 Safety
5