Autoscope Lens Motor Installation - Runco VIDEO XTREME VX-22D Installation & Operation Manual

Installation
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure
3-8. Line up the mounting holes on the lens motor housing with those on the underside of
the projector. Secure the motor to the projector with the six remaining M6 x 12mm
Pan-Head Phillips screws (item #2).
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the VX-22d
(page 28).
Runco VX-22d Installation/Operation Manual 27