Runco VIDEO XTREME VX-22D Installation & Operation Manual page 81

Table 6-1. Serial Commands (continued)
Command
Loads "ISF Night" image preset
SISF 0
Loads "ISF Day" image preset
SISF 1
Loads "Custom 1" image preset
SISF 2
Loads "THX" image preset
SISF 3
The following serial commands are meant to emulate buttons on the remote control or DHD
Controller front panel. Each button has its own serial command, so effectively it is as if you were
using the IR remote only you'll be doing so via serial commands. These commands provide active
OSD responses just like the IR remote.
ENTR ENTER (or SELECT) button
EXIT button
EXIT
MENU MENU button
MND Down-Arrow (
MNL Left-Arrow (
Right-Arrow (
MNR
MNU Up-Arrow (
The following serial commands are meant to emulate the discrete picture adjustment buttons on
the remote control unit. Use them in conjunction with
adjustments. For example, to increase Brightness by five increments, send this sequence of
commands:
MBR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
EXIT <Enter>
Adjust Brightness
MBR
MCOL Adjust Color Level
MCON Adjust Contrast
MTIN Adjust Tint
Runco VX-22d Installation/Operation Manual
Description
Image Preset Commands
Menu Navigation Commands
) button
) button
) button
) button
Picture Adjust Commands
MNL
Response
ISF Night
ISF Day
Custom 1
THX
(none)
and/or MNR to make picture
(none)
67
Serial Communications