To display the Main Menu, press the MENU button on the remote control (Figure 2-5),
DHD Controller front panel (Figure 2-3) or projector rear panel (Figure 2-2).
To select a menu item, use the
front panel or projector rear panel to highlight it. Then, to confirm your selection, press
ENTER on the remote control (or SELECT on the DHD Controller front panel or projector
rear panel).
The VX-22d OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending
on the selected input source and signal characteristics, some menu options may not be
available.
Runco VX-22d Installation/Operation Manual
and
buttons on the remote control, DHD Controller
47
4. Operation
4.1
Using the On-Screen
Menus