Runco VIDEO XTREME VX-22D Installation & Operation Manual page 44

Installation
Use a Runco DVI Dual-Link (DVI-DL) cable to connect the output of the DHD Controller to
the input of the VX-22d; see Figure 3-10.
cover. lamp the off pull
to screw the Remove
Remove the screw to
pull off the lamp cover.
Figure 3-10. Connecting the VX-22d to the DHD Controller
Service port.
INPUTS
Not for user
access
WIRED
SERVICE ONLY REMOTE
SYSTEM CONTROL INTERFACE
30 Runco VX-22d Installation/Operation Manual
HD1 (RCA)
Y / G Pb / B Pr / R Hs Vs Y / G Pb / B Pr / R
I II III
HD3 (VGA / Y-Pb-Pr)
I II
RS-232 / 485
TRIGGERS HDMI
SERVICE PORT
AUTHORIZED
PERSONNEL ONLY
L
L
HD2 (BNC)
Hs Vs
COMPOSITE S-VIDEO