When The Machine Makes A Beeping Sound - Ricoh SP C360 series User Manual

9. Troubleshooting

When the Machine Makes a Beeping Sound

The following table describes the meaning of the various beep patterns that the machine issues to alert
users about left originals and other machine conditions.
Beep pattern
Single short beep
Short, then long beep
Single long beep
2 long beeps
5 long beeps
5 long beeps repeated four
times.
5 short beeps repeated five
times.
• Users cannot mute the machine's beep alerts. When the machine beeps to alert users of a paper
jam or toner request, if the machine's covers are opened and closed repeatedly within a short
space of time, the beep alert might continue, even after normal status has resumed.
140
Meaning
• Panel/screen input
accepted.
• Login/logout
successful.
Panel/screen input rejected.
Job completed successfully.
Machine has warmed up.
Soft alert
Soft alert
Strong alert
Cause
• A screen key was pressed.
• A user has logged in to or out
from the machine successfully.
An invalid key was pressed on the
screen, or the entered password was
incorrect.
A Copier Features job or fax
transmission/reception has been
completed.
When the power is turned on or the
machine exits Sleep mode, the
machine has fully warmed up and is
ready for use.
An auto reset was performed through
the simple screen of the Copier
function, the Facsimile function (for SP
C360SFNw/C361SFNw), or the
Scanner function.
An original has been left on the
exposure glass or paper tray is empty.
The machine requires user attention
because paper has jammed, the toner
needs replenishing, or other problems
have occurred.