Ricoh SP C360 series User Manual page 155

When print jobs are canceled
Message
"Collate has been
cancelled."
"Exceeded the maximum unit
count for Print Volume Use.
This job has been
cancelled."
"Receiving data failed."
"The selected paper size is
not supported. This job has
been cancelled."
"The selected paper type is
not supported. This job has
been cancelled."
When there is a problem with the print settings
Message
"Duplex has been cancelled."
Cause
Collate was canceled.
The number of pages the
user is permitted to print has
been exceeded.
Data reception was aborted. Resend the data.
Job reset is automatically
performed if the specified
paper size is incorrect.
Job reset is automatically
performed if the specified
paper type is incorrect.
Cause
Duplex printing was canceled.
Messages Displayed When You Use the Printer Function
Solution
• Turn off the power, and then back
on again.
• Reduce the number of pages to
print.
If the message appears again, contact
your service representative.
• For details about print volume use
limitation, see "Managing Print
Volume per User", Security
Guide.
• Reduce the number of registered
User codes.
Specify the correct paper size, and
then print the file again.
Specify the correct paper type, and
then print the file again.
Solution
Change the setting for "Apply 2
sided" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply 2 sided", see
"Tray Paper Settings",
Connecting the Machine/
System Settings.
153