Controller Connection - Runco VideoWall VW-100HD Installer/Integrator Manual

Installation
RS-232 Controller
Connection
Composite/S-Video Connections: Connect your Composite and S-Video sources to
the VideoWall/CineWall as shown in Figure 3-5.
COMPONENT
S-VIDEO
COMPOSITE
Figure 3-5. Composite and S-Video Connections
➤
Connect a PC or home theater control/automation system (if present) to the RS-232 port
as shown in Figure 3-6. Use a standard, straight-through Category 5 cable with RJ-45
plugs at each end.
At the PC/control system end, use an RJ-45 to DB-9 adapter wired as shown. Such
adapters are readily available at electronics or computer supply stores.
For more information about using this connection, refer to Serial Communications on
page 57.
RS-232
AL DVI
HDMI
Figure 3-6. RS-232 Control System Connection
Standard Cat. 5 Cable,
RJ-45 Male
to RJ-45 Male
8
1
28 VideoWall™/CineWall™ Installer/Integrator Manual
VCR
Camcorder
Gaming Console
Wire the Adapter as follows:
RJ-45 Pin Wire Color DB-9 Pin
6 Yellow 3
5 Green 5
3 Black 2
Adapter, RJ-45 Female
to DB-9 Female
To/From
Control
System
or PC