Ir Remote Controller; Maintenance; Specifications - JB Systems RAVE SPOT Operating Manual

ENGLISH

IR REMOTE CONTROLLER

EXTRA MENU OPTIONS
Press the [MENU] button till [SYS] appears on the display
Press [ENTER] and use the [UP] & [DOWN] buttons to browse the different options:
•
[LEdS]: use this option to select if the display needs to go out when it is not used or if it has to be lit
all the time
•
[LEdr]: use this option to reverse the display. This can be useful when the unit is positioned upside-
down.
•
[rESt]: use this option to restore the initial factory settings.

MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during servicing.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
• The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 30 days.
• Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This device was designed to produce decorative effect lighting and is used in light show systems.
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
JB SYSTEMS®
Button Function
ON/OFF
AUTO
SOUND
No function
No function
No function
AUTO / SOUND
PAUSE
COLOR SELECT
SPEED
To switch the effect On or Off
To select programs 1-17
To select sound activated programs 1-13
To toggle between automatic and sound mode
To pause the program
To select colors 1 - 24
Select the speed for the automatic programs
11/12
USER MANUAL
Description
RAVE SPOT