JB Systems RAVE SPOT Operating Manual page 5

ENGLISH
DESCRIPTION:
1. MAINS OUTPUT: you can use our "combi cables" and this IEC output to easily daisy-chain the next unit.
2. MAINS INPUT: with IEC socket and integrated fuse holder; connect the supplied mains cable here.
3. FUSE HOLDER: holds a slow blow 1.6A/250V glass fuse to protect the internal electronic circuits.
4. DMX INPUT: 3pin male XLR-connector used to connect universal DMX-cables. This input receives
instructions from a DMX-controller or the Master unit in Master/slave mode.
5. SAFETY EYEBOLT: used to attach a safety cable when the unit is rigged (see "overhead rigging")
6. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)
7. VENTILATION OPENING: used for the cooling of the unit. Do not cover the opening !
8. USB CONNECTOR: used for connecting the WTR-DMX DONGLE (order code 04645) for wireless DMX
in combination with our M-DMX TRANSCEIVER (order code 04646). Don't use this connector for
connection with a PC!
JB SYSTEMS®
®
and you will get wireless DMX! Moreover you will be able
3/12
USER MANUAL
®
. The separate
RAVE SPOT