Before Use - JB Systems RAVE SPOT Operating Manual

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
• 3 effects in one single unit !
• 9x8W Red-Green-Blue-UV Leds for colored beams + UV/Blacklight effect
• 1 central COB 30W RGB led
• Led Strobe: 21x 0.5W White Leds
• Use the unit in any way you like it !
• Standalone: sound activated (internal mic) or automatic shows. IR remote controller included.
• Master/slave function for wonderful synchronized shows when several units are used.
• DMX-control: via 1, 2, 4, 6, 9 or 22 Channels.
• 4-digit LED display for easy menu navigation
• Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (optional, Briteq
• IEC mains input + output for easy linking (check out our combi cables)

BEFORE USE

• Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
• Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
• Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the cardboard box contains the following items:
• RAVE SPOT unit
• Mains cable
• IR Remote controller
• Operating instructions
JB SYSTEMS®
®
product. To take full advantage of all possibilities and for your own
1/12
USER MANUAL
®
code 4645)
RAVE SPOT