wool, linen and
Silk, rayon, knits,
buttons on front
WHAT IT DOES
Squeeze the handles of the clip to open and insert the
clothing between the pads.
tension to virtually
all types of
Be sure not to add wrinkles when placing the clothing into
clothes to remove
Make sure weights touch for the best results on button-
Do not use on
down shirts, blouses and skirts.
cashmere, lace or
other fine fabrics
When placing weights over seams on pants and skirts, be
that will stretch.
sure to align the depression in the middle of the pad with
Holding from outside of the shirt, place the spring-loaded
end of the shaper against the left side seam of the shirt.
With your right hand outside the shirt, place the right side
seam against the end of the shaper. Make sure both ends
are against the side seams in order to prevent the shaper
to the body of
from falling out. Expand the shaper by pulling the right end
of the shaper until there is enough tension to hold the
shaper inside the clothing. Slight pulling in the button area
is normal. To retract the shaper, gently press the button on
the shaper and push the extended side back.
Remove shapers from the black strap. Insert the sleeve
shaper into a buttoned long-sleeve with the straight end of
to long sleeves by
the shaper being inserted first. Align one side of the shaper
to the seam of the sleeve. Insert the shaper until
the shaper extends past the cuff. To remove, squeeze the
shaper and remove from the sleeve. (When storing sleeve
shapers, use the black strap to keep shapers closed.)
HOW TO USE