Skirts and shorts
are inserted up
into the Grips.
Hanging Accessories - What they are and how they are used
WHAT IT DOES
Shirts/blouses that button are draped over the Clothes
Hanger and then buttoned. For non-buttoned shirts (polo
proper support in
shirts and blouses), the clothes hanger is inserted into the
the shoulder area.
shirt from the bottom.
Used to hang
With the clothes hanger on the front notch of the hanger
skirts and shorts.
bar, adjust the width of the Grips to 1
Shorts are hung
width of the waistband or the legs of a pair of shorts. With
by the legs.
both hands, slide the clothing up into the Grips, making
sure the top of the clothing is all the way up. Do not
squeeze these Grips to open. To remove clothing, pull
handles on Grips toward you.
Hangs pants to
Hold pants at cuffs seam-to-seam and slide between the
expose both the
"arms" of the hanger. Drape one leg of the pants over
inside and outside
one of the arms and the other leg over the other arm of
seam to the
the hanger. The pant leg should hang down about 12 to
Place one end of the Draping Bar into the holes on the right
side of the interior wall. Slide the other end into the opposite
channel on the left side. Place the dress on the hanger and
bottom of the
drape the dress over the Draping Bar. Adjust the bottom of the
dress so that it does not touch the bottom of the cabinet.
For sweaters, hang the sweater over the bar with the arms
supported by the Draping Bar.
Two Draping Bars at the same level make a platform for small
pillows, blankets and other household items. Make sure items
do not touch the cabinet sides. The second Draping Bar is part
of an accessory kit that is sold separately (page 14).
HOW TO USE
in. less than the
Logo faces front