Installation Information; Installation Instructions - KitchenAid Kitchen Aid KICU500X Technical Education

INSTALLATION INFORMATION

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Disconnect power or unplug the cooktop.
NOTE: Kit Part Number W10310006 is re-
quired for installing the cooktop into a marble
countertop. See the "Assistance or Service"
section of the Use and Care Guide for infor-
mation on ordering.
To Install Brackets into Marble Countertop:
2. Clean the brackets and cooktop cutout of
any dust and debris.
3. Measure the center line of the vertical
sides of the cooktop cutout..

Installation Instructions

Center line
4. Apply the adhesive provided in the kit to
the back side of the brackets.
5. Position brackets in the center of the
vertical centerline and align the upper
edge of the brackets so that they are
flush with the countertop.
A
B
A. Bracket
B. Screw
6. Push the brackets firmly onto each side
of the cooktop cutout and wait 1-hour for
adhesive to dry.
2-1