Heat Sink - HP 15-cx0000 Maintenance And Service Manual

Heat sink

NOTE: The heat sink spare part kit includes replacement thermal materials.
Description
Heat sink for use in models with 8250U/8550U processors and GeForce GTX 1050 graphics
Heat sink for use in models with 8300H/8750H processors and GeForce GTX 1050/1050 Ti graphics
Heat sink for use in models with 8300H/8750H processors and GeForce GTX 1060 Max-Q
Heat sink for use in models with 8300H/8750H processors and Radeon RX 560 graphics
Thermal pad kit (for use on system board components serviced by the heat sink)
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the heat sink assembly:
1. In the order indicated on the heat sink assembly, remove the seven Phillips M2.0×3.0 screws (1) that
secure the heat sink to the computer.
2. Lift the heat sink assembly from the computer (2).
52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 39).
36).
Spare part number
L20338-001
L20339-001
L20340-001
L20341-001
L23785-001