Table of Contents
Advertisement
5.6 Saved Data
Types of Saved Data
File Name
File names are automatically assigned with incrementing file numbers.
As the current file number is retained even when the power is turned off,
it will keep incrementing until the system is reset or until the maximum
count is reached. Even if you change the save destination, files are saved
with serial numbers.
If a file with the same file number already exists at the save destination,
the measured data file name is automatically incremented to the next
number. Screenshot data and setup data are overwritten with the same
file names. Be careful when you reset the system and start saving the
files from number zero and when sharing a single SD memory card
between several CW500s. Note that if all the file numbers from 0 to 9999
are used up, measured data files are also overwritten.
If files are deleted or the folder or files are renamed from a PC or the like,
data operations on the CW500 and analysis using CW500 Viewer will no
longer be possible. Do not change folder names or file names from a PC.
Print screen
Press PRINT SCREEN to save a screen image as BMP data.
File name: PS-
Dest. code
SD: SD memory card
ME: Internal memory
System settings
Press SETUP, and select Saved data and then Save Settings to save the
CW500 setup data.
File name:
S: SD memory card
M: Internal memory
5-42
SD
|
SUP
S
|
Dest. code
000
|
File No.
(000 to 999)
0000
.PRE
|
File No.
(0000 to 9999)
.BMP
|
Extension
(BMP file)
IM CW500-01EN
Advertisement
Table of Contents
