Table of Contents
Advertisement
Chapter 5 Setup
5.1
Settings
Before starting measurement, you need to set measurement conditions
and data saving conditions.
To set these conditions, press SET UP to enter the SET UP mode.
The SET UP mode is divided into the following five categories. Use the
arrow keys to move between the categories.
The settings that you change take effect after you exit from the SET UP
mode and
Note that even if you change the settings, if you turn off the power while
in SET UP mode, the settings will not take effect.
Basic
Measurement Set specific measurement items.
Recording
Saved Data
Others
Basic
(Wiring)
(Voltage)
(Current)
(External
input DC)
(Frequency)
IM CW500-01EN
appears in the upper left of the screen.
Set common measurement items.
Set the saving method.
Edit recorded data or change the instrument settings.
Configure environmental settings.
Measurement
(Demand)
(Harmonics)
(Rec method)
(Power quality)
Time period rec.)
(Flicker)
(Phase advance
capacitor)
Settings
Recording
Saved Data
(REC item)
(Rec data)
(System settings)
(Manual/
Constant rec.
Others
(Environment)
(System settings)
5-1
Advertisement
Table of Contents
