5.5 Other Settings
Date format
Select the date display format. You can change the display format of all
displayed dates, such as the current date shown in the upper right of the
screen and the recording start and stop dates that are shown and that
you edit.
YYYY/MM/DD / MM/DD/YYYY
* Default value. However, this setting will not be initialized even when the
system is reset.
<Procedure>
Use the up and down arrow keys to move to Date format.
ENTER to show a pull-down menu.
to select the format.
CH color
Specify the colors for voltage and current of each channel. You can
change the item label text colors, graph colors, wiring diagram's channel
colors, and so on.
White*
VN is only supported in wiring diagrams.
* The default color settings are VN: Yellow, 1CH: Red, 2CH: White, 3CH:
Blue, 4CH: Green. However, these setting will not be initialized even
when the system is reset.
<Procedure>
Use the arrow keys to move to CH color.
selection window.*
ENTER to confirm or ESC to cancel.
5-32
Settings
→
Press ENTER to confirm or ESC to cancel.
/
Yellow*
/
Orange
→
Use the arrow keys to select the color.
*
/ DD/MM/YYYY
→
Use the up and down arrow keys
Settings
/
Red*
/
Gray
→
Press ENTER to show a
→
Press
/
Blue*
/
Green*
→
IM CW500-01EN
Press