Signal Control With External Devices - YOKOGAWA CW500 User Manual

8.2

Signal Control with External Devices

Connecting I/O Terminals
• Apply voltage in the range of ±11 V to the input terminals
and in the range of 0 to 30 V (50 mA, 200 mW) to the output
terminals. Exceeding these ranges can damage the CW500.
• The L terminals of each channel are connected internally. Do
not simultaneously connect different ground levels to the L
terminals.
Input Terminals
Do not mistake input terminals for output terminals or vice versa.
Connectable signal wire sizes are as follows.
Suitable wire: Single wire φ1.2 mm (AWG16)
Usable wire: Single wire φ0.4 to 1.2 (AWG26 to 16)
Standard length of stripped wire: 11 mm
8-2
Stranded wire 1.25 mm
or more
Stranded wire 0.2 to 1.25 mm
diameter 0.18 mm or more
CAUTION
2
(AWG16) strand diameter 0.18 mm
2
(AWG24 to 16) strand
Output Terminals
IM CW500-01EN