Table of Contents
Advertisement
Chapter 9 PC Software for Configuration and Analysis
9.1
PC Software for Configuration and
Analysis
The software "CW500VIewer" can be used to analyze the data recorded
on the CW500 and also configure the CW500. You can automatically
create graphs and lists from recorded data with a single click, convert
recorded data to CSV format, centrally manage setup data and recorded
data of several CW500s, and output data expressed in crude oil and CO2
equivalent values in reports.
To use CW500Viewer, install the application and USB driver in your PC
according to the installation manual provided as a PDF file.
• Interface
The CW500 is equipped with a USB interface.
Transmission mode:
USB communication can be used to perform the following operations.
• D ownload files in the CW500 internal memory to a PC
• Configure the CW500 from a PC
• Retrieve measured values in real time from the CW500 and display
them and a graph on the PC
• System Requirements
• Operating System
Windows 7, Windows 8, Windows 10
• Display Screen
1024×768 dots, 65536 colors or more
• Hard disk space
1 GB or more (including Framework)
• .NET Framework (3.5 or higher)
IM CW500-01EN
USB Ver 2.0
9-1
Advertisement
Table of Contents
