Table of Contents
Advertisement
5.6 Saved Data
Delete data
This is used to delete measured data, screenshots, and setup data from
the SD memory card or internal memory. Be careful when deleting data
files because they are not sorted by recording date. The data recording
dates are listed to the right of file names. Note that dates of data files
transferred from the internal memory to an SD memory card are the dates
when they were transferred. A scroll bar appears when not all the data
can be displayed on the screen.
Data location
Scroll bar
Check box
<Procedure>
Use the up and down arrow keys to move to the data you want to delete.
→
→
Press ENTER to select it.
Press F2 to show a delete confirmation
→
→
message.
Use the left and right arrow keys to select Yes or NO.
Press ENTER to confirm.
When you select a data file, the corresponding check box is selected. You
can delete several data files at once.
Delete
Press F2 (delete) to show a confirmation message. Select "Yes" to delete
the data.
Internal/SD card
Press F3 to switch between the SD memory card and internal memory.
The selected medium is displayed in the upper left of the screen.
Switching the screen clears all the selected check boxes.
5-37
IM CW500-01EN
Advertisement
Table of Contents
