Software Version - JVC RA-D38B Instruction Manual

Table of Contents


3. The display will show "Alarm Saved" after the setup is done.
4. Once the alarm is set, 1 (Alarm 1)/ 2 (Alarm 2) or
and Alarm 2) icon will show on the display.
5. To temporarily switch off alarm, press SNOOZE/Dimmer button to
activate Snooze function when alarm sounds. Press SNOOZE/Dimmer
button repeatedly to set snooze period time of 5, 10, 15 or 30 minutes
in turn. The set snooze time will show on the display and unit will go to
The options of Snooze time depends on which alarm duration time you
Alarm duration time
15 minutes
30 minutes
45/60/90/120 minutes
6. To turn off alarm, press Standby or Alarm/Mode button when alarm

Software version

This information may be requested when dealing with technical support
1. Press and hold Info/Menu button, and then press Tune /Tune
button to select <System>. Press Select button to confirm.
2. Press Tune /Tune button to select <SW version>, and then press
Select button to confirm.
3. The software version will show on the display.
4. Press Info/Menu button to exit.
Snooze time
5 or 10 minutes
5, 10 or 15 minutes
5, 10, 15 or 30 minutes
(Both Alarm 1

Hide quick links:


Table of Contents

This manual is also suitable for:


Table of Contents