Vista VK2-1080MD37W User Manual
  1. Manuals
  2. Brands
  3. Vista Manuals
  4. Security Camera
  5. VK2-1080MD37W
  6. User manual

Vista VK2-1080MD37W User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VK2-1080MD37W
User manual

Advertisement

Table of Contents
loading

Related Manuals for Vista VK2-1080MD37W

Summary of Contents for Vista VK2-1080MD37W

  • Page 1 VK2-1080MD37W User manual...
  • Page 2 Please read this manual thoroughly before use, and keep it handy for future reference. VK2-1080MD37W User manual V1.0...
  • Page 3 Height and vertical linearity controls located at the rear damage the finish of the unit. panel are for special adjustments by qualified personnel only. Retain the original carton and packing materials for safe transport of this unit in the future. VK2-1080MD37W User manual V1.0...
  • Page 4 WITH ANY OTHER ANTENNA OR TRANSMITTER. CE COMPLIANCE STATEMENT WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures VK2-1080MD37W User manual V1.0...
  • Page 5 (7.9in) FROM ALL PERSONS AND MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. VK2-1080MD37W User manual V1.0...
  • Page 6 OPERATING INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO. 16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only. 17. ITE is to be connected only to PoE networks without routing to the outside plant. VK2-1080MD37W User manual V1.0...

  • Page 7: Table Of Contents

    3.2 Access from the internet -------------------------------------------------------------------------------------- 14 3.3 Setting the admin password over a secure connection ----------------------------------------------- 14 3.4 Live View Page ------------------------------------------------------------------------------------------------- 15 3.5 VK2-1080MD37W Setup ------------------------------------------------------------------------------------- 17 3.5.1 Basic Configuration ----------------------------------------------------------------------------------- 17 1) Users -------------------------------------------------------------------------------------------------- 18 2) Network ----------------------------------------------------------------------------------------------- 19 3) Video &...

  • Page 8: Description

    1. Description This manual applies to the VK2-1080MD37W mini dome camera. These cameras are fully featured for security surveillance and remote monitoring needs. They are based on the DSP compression chip, allowing real-time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams.

  • Page 9: Key Features

    • Triple streams The VK2-1080MD37W can deliver triple video streams simultaneously at full frame rate in all resolutions up to 1920 x 1080 using Motion JPEG and H.264 (or MPEG-4). This means that several video streams can be configured with different compression formats, resolutions and frame rates for different needs.

  • Page 10: Layout

    Yellow : Alarm input, Black : GND, Blue : Alarm output Power Cable Cable for Power source (DC 12V) Ethernet Cable Cable for Ethernet (POE)  Camera Dimension See the diagrams below for the exact dimension Dimensions Unit: mm VK2-1080MD37W User manual V1.0...

  • Page 11: Installation

    1) Make screw holes for camera on the ceiling with Template Sheet 2) Disassemble a camera by Camera Cover 3) Fix the camera set using Anchors(2x) and Screws(2x) to the ceiling. 4) Assemble Camera Cover to Dome Camera. Turn Camera Cover clockwise to complete installation Lock clockwise VK2-1080MD37W User manual V1.0...
  • Page 12 WEP or WPA-PSK, will be synchronized with the AP. As for IP setting, the camera's use of DHCP or static IP is determined by your configuration on the VK2-1080MD37W via the web- based configuration of firmware. The camera's default is DHCP. Notes: 1.

  • Page 13: Network Connection And Ip Assignment

    2.2 Network Connection and IP assignment The VK2-1080MD37W supports the operation through the network. When a camera is first connected to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”...

  • Page 14: Operation

    3.1 Access from a browser Start a browser (Internet Explorer). Enter the IP address or host name of the VK2-1080MD37W in the Location/Address field of your browser. You can see a starting page. Click Live View or Setup to enter web page.

  • Page 15: Access From The Internet

    3.2. Access from the internet Access from the internet once connected, the VK2-1080MD37W is accessible on your local network (LAN). To access the VK2-1080MD37W from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the network camera.

  • Page 16: Live View Page

    The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops the video stream being played. Pressing the key again toggles the start and stop. The Start button connects to the VK2-1080MD37W or start playing a video stream.
  • Page 17 The Live View page in VK2-1080MD37W provides access to H.264, MPEG-4 and Motion JPEG video streams, and to the list of available video streams. Other applications and clients can also access these video streams/images directly, without going via the Live View page.

  • Page 18: Vk2-1080Md37W Setup

    Basic, Live View, Video & Image and System Configuration. You can configure the VK2-1080MD37W by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools When accessing the VK2-1080MD37W for the first time, the “Admin Password”...

  • Page 19: Users

    An administrator has unrestricted access to the Setup tools and Administrator can determine the registration of all other users. Enable anonymous viewer login: Check the box to use the webcasting features. Refer to “3.5.2 Video & Image” for more details. VK2-1080MD37W User manual V1.0...

  • Page 20: Network

    The VK2-1080MD37W supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the VK2-1080MD37W can be set automatically via DHCP, or a static IP address can be set manually.
  • Page 21 Constrained Baseline Profile has been defined. H.264 BP(Baseline Profile): Originally intended as the mainstream consumer profile for broadcast and storage applications, the importance of this profile faded when the High profile was developed for those applications. VK2-1080MD37W User manual V1.0...
  • Page 22 To prevent increased bandwidth and storage usage, the Resolution, Frame rate, and Frame Quality should be set to an optimal value. JPEG resolution: Same as the Stream1 Setting. JPEG frame rate: Same as the Stream1 Setting. VK2-1080MD37W User manual V1.0...
  • Page 23 From the Time Mode section, select the preferred method to use for setting the time: Synchronize with computer time: sets the time from the clock on your computer. Synchronize with NTP Server: the VK2-1080MD37W will obtain the time from an NTP server every 60 minutes.

  • Page 24: Video & Image

    Time Format: Specify the date format. 24Hours or 12 Hours 3.5.2 Video & Image  Live View • Video Input Mode Video Mode: Choose Video Mode you wish to use from the drop-down list: NTSC or PAL VK2-1080MD37W User manual V1.0...

  • Page 25: Video & Image

    3.5.3 Video & Image  Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details. VK2-1080MD37W User manual V1.0...
  • Page 26 Enable flip image: Check this box to flip the image. Enable mirror image: Check this box to mirror the image. Enable Noise Reduction: Check this box to reduce an image noise. VK2-1080MD37W User manual V1.0...
  • Page 27 60Hz: Select at 60 Hz environments. Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera. Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15. • White Balance Control VK2-1080MD37W User manual V1.0...
  • Page 28 Mode: Normally works in day mode. It switches automatically to night mode in a dark place. Automatic: Normally works in day mode. It switches automatically to night mode in a dark place. Day: Always works in day mode. Night: Always works in night mode. VK2-1080MD37W User manual V1.0...
  • Page 29 The privacy masks are configured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delete, or move the window, by selecting the appropriate window at the mouse menu on the video screen. To create a mask window, follow steps: VK2-1080MD37W User manual V1.0...
  • Page 30 Select “Enable” to activate the privacy masking function.  Webcasting The VK2-1080MD37W can stream live video to a website. Copy the HTML code generated on the screen and pastes it in page code of the website you want to display live video.

  • Page 31: Event

    3.5.4 Event 1) Event-In  On Boot This is used to trigger the event every time the VK2-1080MD37W is started. Select “Enable” to activate the motion event. VK2-1080MD37W User manual V1.0...
  • Page 32 Dwell time: The default setting is 60 seconds. Dwell time means how long time the alarm input signal hold on as an input signaling source. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it. VK2-1080MD37W User manual V1.0...
  • Page 33 This option makes use of the manual trigger button provided on the live view page, which are used to start or stop the event type manually. Alternatively the event can be triggered via the product's API (Application Programming Interface). VK2-1080MD37W User manual V1.0...
  • Page 34 Motion detection windows are configured by Motion or Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delete, or move the window, by selecting the appropriate window at the mouse menu on the video screen. VK2-1080MD37W User manual V1.0...
  • Page 35 Dwell Time: Set the hold time an event lasts for the specified hold time from the point of detection of a motion. You can also modify or delete a motion index. Select an index and then, click the Modify or Delete button. Select “Enable” to activate the motion window. VK2-1080MD37W User manual V1.0...
  • Page 36  Network Loss This is used to trigger the event every time the network connection is failed. Select “Enable” to activate the Network Loss event. VK2-1080MD37W User manual V1.0...
  • Page 37 2) Event-Out  SMTP(E-Mail) The VK2-1080MD37W can be configured to send event and error email messages via SMTP (Simple Mail Transfer Protocol). • SMTP(E-Mail) Setting Select “Enable” to activate the SMTP operation. Mail Server / Port: Enter the host names (or IP addresses) and port numbers for your mail server in the fields provided, to enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.
  • Page 38  FTP & JPEG When the VK2-1080MD37W detects an event, it can record and save images to an FTP server. Images can be sent as e-mail attachments. Check the box to enable the service.
  • Page 39 Additional suffix: Add either a date/time suffix or, a sequence number - with or without a maximum value  HTTP Server When the VK2-1080MD37W detects an event, HTTP Server is used to receive uploaded image files and/or notification messages. Check the box to enable the service. •...
  • Page 40 Type: The default setting is NO. NO: Normally Open NC: Normally Close Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it. VK2-1080MD37W User manual V1.0...
  • Page 41 ▼ Record When the VK2-1080MD37W detects an event, it can record video stream in the Micro SD Memory (not supplied) or NAS (Network Attached Device) as a storage device. Check the box to enable the service. • Record Setting Overwrite: Click checkbox to overwrite the storage device.
  • Page 42 * Capacity: Enter the capacity of storage to be used. It must be less than the total storage capacity. * IP/Password: Enter ID and Password. The VK2-1080MD37W will ask them whenever you access NAS device. * Check: Press the Check button to check the validity of Device Setting data.
  • Page 43 ▼ Event Notification When the VK2-1080MD37W detects an event, Notification Server is used to receive notification messages as a type of XML data format. Check the box to enable the service. • Event Notification Setting Notification Server URL: The network address to the server and the script that will handle the request.
  • Page 44 Framerate: Select a frame refresh rate per second for each condition in the drop-down list. Bitrate control: Select VBR or CBR in the drop-down list in Normal Condition. You can’t change it in Boost Condition. Bitrate: Select a value for each condition in the drop-down list. VK2-1080MD37W User manual V1.0...
  • Page 45 The event map allows you to change the settings and establish a schedule for each event trigger from the Network Camera. You can register the event map up to max. 15. Click Add button to make a new event map and you can see a popup window as below. VK2-1080MD37W User manual V1.0...

  • Page 46: Event-In

    Check the box to enable the Function. Record: When the VK2-1080MD37W detects an event, it can record video stream in the Micro SD Memory (not supplied) or NAS (Network Attached Device) as a storage device.

  • Page 47: System

    You can enter the system information. This page is very useful when you refer device information after installation. • Device Name Configuration Enter the device name. • Location Configuration Enter the location information. You can enter that by four. VK2-1080MD37W User manual V1.0...

  • Page 48: Security

    Live View page, as described below: • User Setting Check the box to enable anonymous viewer login to the VK2-1080MD37W without the user account. When using the user account, users have to try log-in at every access. •...
  • Page 49  HTTPS For greater security, the VK2-1080MD37W can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secure Socket Layer)). That is, all communication that would otherwise go via HTTP will instead go via an encrypted HTTPS connection. •...
  • Page 50 Note that users from IP addresses that will be allowed must also be registered with the appropriate access rights (Guest, Operator or Administrator). This is done from Setup> System>Security>Users. VK2-1080MD37W User manual V1.0...

  • Page 51: Date & Time

    From the Time Mode section, select the preferred method to use for setting the time: Synchronize with computer time: sets the time from the clock on your computer. Synchronize with NTP Server: the VK2-1080MD37W will obtain the time from an NTP server every 60 minutes.

  • Page 52: Network

    4) Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be established, along with setting for DDNS, uPnP, QoS, Zeroconfig, Bonjour and wireless. VK2-1080MD37W User manual V1.0...
  • Page 53 IP address: Specify a unique IP address for your Network Camera. Subnet mask: Specify the mask for the subnet the VK2-1080MD37W is located on. Default router: Specify the IP address of the default router (gateway) used for connecting devices attached to different networks and network segments.
  • Page 54 When using the high-speed Internet with the telephone or cable network, users can operate the VK2-1080MD37W even on the floating IP environment in which IPs are changed at every access. Users should receive an account and password by visiting a DDNS service like http://www.dyndns.com/, or http://www.cctv-network.co.kr/.
  • Page 55 On the other hand, if a network status is poor, enter a higher value. When there are many Network Cameras or users, a higher value may cause a heavy load to the network. For a detailed setting, please consult with a network manager. VK2-1080MD37W User manual V1.0...
  • Page 56  UPnP The VK2-1080MD37W includes support for UPnP™. UPnP™ is enabled by default, and the VK2- 1080MD37W then is automatically detected by operating systems and clients that support this protocol. Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the Control Panel from the Start Menu and select Add/Remove Programs.
  • Page 57 Mbit/s or kbit/s. Auto frame rate: Selected if not influenced by a network-related program or equipment without a limitation on the network bandwidth. VK2-1080MD37W User manual V1.0...
  • Page 58 For NAT traversal to work, this must be supported by the broadband router. The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same. VK2-1080MD37W User manual V1.0...
  • Page 59 Save.  Zeroconfig Zeroconfig allows the VK2-1080MD37W to create and assign IP address for network cameras and connect to a network automatically. Zero configuration networking (zeroconf), is a set of techniques that automatically creates a usable Internet Protocol (IP) network without manual operator intervention or special configuration servers.
  • Page 60 Automatic location of network services, such as printing devices through DNS service discovery.  Bonjour The VK2-1080MD37W includes support for Bonjour. When enabled, the VK2-1080MD37W is automatically detected by operating systems and clients that support this protocol. Note: Bonjour - Also known as zero-configuration networking, Bonjour enables devices to automatically discover each other on a network, without having to enter IP addresses or configure DNS servers.
  • Page 61 Video Surveillance as a Service (VSaaS) refers to hosted / Internet recording of security camera video. VSaaS takes video monitoring into the cloud. Sometimes referred to as hosted or managed video services, video from customer IP cameras or webcams is transmitted to the service provider’s secure cloud infrastructure. VK2-1080MD37W User manual V1.0...
  • Page 62 This list is the result of a network scan. Access points with a disabled SSID Broadcast will not appear unless the camera is linked to it. The VK2-1080MD37W is currently linked to is shown in blue. A network using unsupported security is shown in grey. The following information is provided: SSID: The name of a wireless network (or ad-hoc device).

  • Page 63: Language

    5) Language It will be able to select a user language. The type of language it will be able to select is the English, the French, the German, the Spanish and the Italian. 6) Maintenance VK2-1080MD37W User manual V1.0...

  • Page 64: Maintenance

    Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-configurations or for firmware upgrades. 7) Support The support page provides valuable information on troubleshooting and contact information, should you require technical assistance. VK2-1080MD37W User manual V1.0...
  • Page 65 • Logs The VK2-1080MD37W support system log information. Click the System Log button to get the log data. • Reports Server Report: Click the Server Report button to get the important information about the server’s status and should always be included when requesting support.
  • Page 66 - Hardware Check: Click the Hardware Check button to diagnose the camera’s hardware like video. VK2-1080MD37W User manual V1.0...

  • Page 67: About

    3.5.6 About The following website will provide the support information for the VK2-1080MD37W information and operation. 3.6 Playback The Playback window contains a list of recordings made to the memory card. It shows each recording's start time, length, the event type used to start the recording, calendar and time slice bar indicates if the recording is existed or not.
  • Page 68 24-hour basis. (4) Search Calendar Search results from the SD local storage in the VK2-1080MD37W connected are displayed monthly. If there is a recorded data for a particular date, a blue square on the date will be displayed.

  • Page 69: Help

    The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a description on setting and Help page by which users can manipulate the VK2-1080MD37W without a reference to the manual. VK2-1080MD37W User manual V1.0...

  • Page 70: Resetting To The Factory Default Settings

    3.8 Resetting to the factory default settings To reset the VK2-1080MD37W to the original factory settings, go to the Setup>System> Maintenance web page (described in “3.5.4 System > Maintenance”) or use the Reset button on the network camera, as described below •...

  • Page 71: Appendix

    4. Appendix 4.1 Troubleshooting Troubleshooting if problems occur, verify the installation of the VK2-1080MD37W with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information.

  • Page 72: Alarm Connection

    Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equipment failure. Every three-month, perform the following maintenance. Inspect all connection cables for deterioration or other damage. Clean components with a clean damp cloth. Verify that all the mounting hardware is secure. VK2-1080MD37W User manual V1.0...

  • Page 73: Product Specification

    Operating Temperature -10°C ~ 40°C Operation Humidity 0~80% (non-condensing) DC 12V 375mA, 4.5W / PoE 93mA, 4.5W Power Consumption Power over Ethernet IEEE 802.3af Class0 Dimensions (H x ø) 55mm x 115 ø Unit Weight 235g VK2-1080MD37W User manual V1.0...
  • Page 74 -. Heavy network utilization due to poor infrastructure. Frame rate and Bandwidth affected. -. Heavy network utilization via wireless router due to poor infrastructure. Frame rate and bandwidth affected. -. Viewing on poorly performing client PCs lowers perceived performance. Frame rate affected. VK2-1080MD37W User manual V1.0...
  • Page 75 VK2-1080MD37W User manual V1.0...

Table of Contents