Notes On Cyber Security; Release History - ABB TTH200 Additional Instructions

14 TTH200, TTR200, TTF200 TEMPERATURE TRANSMITTER | SM/TTX200/SIL-EN REV. E

12 Notes on Cyber security

This product is designed to be connected to and to communicate information and data via a HART network interface. It is operator's
sole responsibility to provide and continuously ensure a secure connection between the product and the plants network or any other
network (as the case may be).
Operator shall establish and maintain any appropriate measures (such as but not limited to the installation of firewalls, application of
authentication measures, encryption of data, installation of anti-virus programs, etc.) to protect the product, the network, its system
and the interface against any kind of security breaches, unauthorized access, interference, intrusion, leakage and / or theft of data or
information.
ABB Automation Products GmbH and its affiliates are not liable for damages and / or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and / or theft of data or information.

13 Release history

Safety Manual History
Rev D: Added TTF200 variant, Updated to HW Rev 1.15, Added influence of optional display, Safety Manual separated for TTX200 and
TTX 300 series and renewed – 2018
Rev C: added HW Version V1.12 – 2015
Device Version History
HW V1.15: quality improvements – 2018
HW V1.13: quality improvements – 2016
HW V1.12: Initial version – 2013
SW 2.01.00: Initial version – 2013
FMEDA History
V3R0: Added influence of optional display, March 23, 2018
V2R2: FMEDA was updated to new HW rev 1.15, variant TTF200 added, January 19, 2017
V2R1: Changed ABB site location to Minden; August 16, 2016
V2R0: FMEDA was updated to new HW rev 1.13; August 8, 2016
V1R0: Review comments incorporated; December 21, 2012
V0R1: Initial version; November 21, 2012