Notes On Cyber Security; Release History - ABB TTH300 User Manual

14 TTH300, TTF300 TEMPERATURE TRANSMITTER | SM/TTX300/SIL-EN REV. E

12 Notes on Cyber security

This product is designed to be connected to and to communicate information and data via a HART network interface. It is operator's
sole responsibility to provide and continuously ensure a secure connection between the product and the plants network or any other
network (as the case may be).
Operator shall establish and maintain any appropriate measures (such as but not limited to the installation of firewalls, application of
authentication measures, encryption of data, installation of anti-virus programs, etc.) to protect the product, the network, its system
and the interface against any kind of security breaches, unauthorized access, interference, intrusion, leakage and / or theft of data or
information.
ABB Automation Products GmbH and its affiliates are not liable for damages and / or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and / or theft of data or information.

13 Release history

Safety Manual History
Rev D: Added influence of optional display, safety manual separated for TTX200 and TTX300 series, safety manual renewed to
IEC 61508:2010 demands – 2018.
Rev C: Safety manual for TTX200 and TTX300 series.
Device Version History
HW V1.07: 2016 – minor HW modification in two capacitor values for increased ex cable length.
HW V1.06: Initial released HW version.
SW 1.03.00: 2015 – HART 7 communication protocol added, DIP Switch Function for HART 5 as with pre-version 1.01.08.
SW 1.01.08: Improvement on wire break errors within environments with very high 50 Hz influence, bugfix operating hours counter.
SW 1.01.07: Initial version.
FMEDA History
V4R2: Added influence of optional display; May 29, 2018.
V4R1: Second HW and SW version added; January 20, 2016.
V4R0: Updated to IEC 61508:2010; January 20, 2016.
V3R0: TT*200 and TSP with TT+200 removed; November 6. 2012.
V2R0: Product named changed, software and hardware version updated; November 13, 2009.
V1R0: Internal review comments incorporated, software version updated; April 2, 2007.
V0R2: External Review comments incorporated; March 19, 2007.
V0R1: Initial version; January 11, 2007.