Chapter 2. Solution components
Use the information in this section to learn about each of the components associated with your solution.
Front view
The following illustration shows the controls, LEDs, and connectors on the front of the server.
Enclosure
The following illustration shows the controls, LEDs, and connectors on the front of the enclosure.
Notes:
1. The illustrations in this document might differ slightly from your hardware.
2. For proper cooling, a node filler has to be installed into every empty node bay in every configuration.
The enclosure supports up to four compute nodes.
The following illustration shows the node bays in the enclosure.
Figure 4. Enclosure front view with compute nodes and node bay numbering
Compute node
The following illustration shows the controls, LEDs, and connectors on the front of the compute node.
Six 2.5-inch drive configuration
See the following illustration for components, connectors and drive bay numbering in six 2.5-inch drive
configuration.
Figure 5. Six 2.5-inch drive configuration and drive bay numbering
© Copyright Lenovo 2018
13