Send Sbd; Priority; Read Last Sms; Delete Last Sms - Beam RST100 Configuration Manual

RST-100 INSTALLATION AND CONFIGURATION MANUAL

Send SBD

Type in the Short Burst message followed by <cr>. The SBD will be sent as an email
attachment to the email address set-up when SBD is provisioned. A maximum of 1890
characters allowed. SBD will only be supported by terminals that have been provisioned by
the Service Provider.

Priority

Relative priority on SMS or SBD message. If set to low a voice or data call in progress will
not be interrupted. If "data" and a data call are in progress, it will be terminated in order to
send the SBD or SMS. If "voice", a data call will be terminated, and a voice call will be
terminated to send an SBD (an SMS can be sent during the voice call).

Read Last SMS

Read the last SMS received. This does not include RST remote control messages or
Voicemail messages.

Delete Last SMS

Delete the above last SMS from the SIM. Shortly after entering this command if there are still
outstanding SMS messages, Read Last SMS will show the next SMS message.
44