Beam RST100 Configuration Manual page 14

RST-100 INSTALLATION AND CONFIGURATION MANUAL
2. Open the BMS application on your PC
3. Once the application is running it should ask you to select the Comm. Port from which
to operate, it may also allow you to select it automatically.
From time to time you may need to restart your computer, as some Comm. ports on
PC's are not as reliable as others.
4. Once the Terminal is found in the display window press OK you will then be able to
access the terminal settings and configuration menus.
5. The BMS will request your Supervisor PIN in order to access this menu you must
enter the default PIN of 3170 (unless it has been previously set to a non-default
value).
14