X8DTN+-F/X8DTN+-F-LR User's Manual
•
Generator ID
•
Event Message Format Version
•
Event Sensor Type
•
Event Sensor Number
•
Event Direction Type
•
Event Data
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure
that you no longer need any data stored in the log before clearing the
BMC Event Log.
Set LAN Confi guration
Set this feature to confi gure the IPMI LAN settings.
Channel Number
Enter the channel number for the SET LAN Confi guration command. It is initially
set to [1].
Channel Number Status
This feature displays the channel status for the Channel Number selected above:
"Channel Number is OK".
IP Address Source
This feature allows the user to select the source of the IP address for the system.
If Static is selected, the user will need to manually enter the IP address for the
system. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Confi guration Protocol) server in the network that the system is attached to, and
request the next available IP address. The options are DHCP and Static. If Static
is selected, the following items will be available for confi guration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it
may be over-written. This should be in decimal and in dotted quad form (i.e.,
5-22