Supermicro X8DTN+-F-LR User Manual page 92

X8DTN+-F/X8DTN+-F-LR User's Manual
Headless Mode
Select Enabled to allow the system to function normally without a keyboard, monitor
or mouse attached. The options are Enabled and Disabled.
NUMA Support
Select Enabled to use the feature of Non-Uniform Memory Access to improve CPU
performance. The options are Disabled, Enabled and NUMA for SLES 11.
ACPI SLIT Table
If this item is set to Enabled, the ACPI SLIT (System Locality Information) Table is
supported by the system. The options are Enabled and Disabled.
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback, reducing the depen-
dency on other timestamp calculation devices, such as an x86 RDTSC Instruction
embedded in the CPU. The High Performance Event Timer is used to replace the
8254 Programmable Interval Timer. The options are Enabled and Disabled.
WHEA Support
Select Enabled to enable Windows Hardware Error Architecture (WHEA) support
which will provide a common infrastructure for handling hardware errors on Windows
platforms in order to reduce system crashes due to hardware errors and improve
system recovery and health monitoring. The default setting is Enabled.
Trusted Computing (Available when a TPM device is
detected by the BIOS)
TCG/TPM Support
Select Yes on this item and enable the TPM jumper on the motherboard to enable
TCG (TPM 1.1/1.2)/TPM support to improve data integrity and network security.
The options are No and Yes.
If this feature is set to Yes, the following items will display.
Execute TPM Command
Select Enabled to execute TPM commands you've selected. Select Don't Change
to keep the current TPM commands without making any changes. Select Dis-
abled to abandon the changes you have made on TPM commands. The options
are Enabled, Disabled and Don't Change.
5-20