Supermicro X8DTN+-F-LR User Manual page 17

Connectors Description
JBAT1 Onboard Battery
COM1/COM2 COM1/COM2 Serial Connections
FAN 1~8 CPU//System Fan Headers (Fans 7, 8: CPU
Fans)
IPMB 4-pin BMC I
I-SATA 0~5 Intel SB SATA Connectors 0~5
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JL1 Chassis Intrusion
2
JPI C1 Power Supply SMBbus I
JPW1 ATX 24-Pin Power Connector (See Warning
on Pg. 2-6.)
JPW2/JPW3 12V 8-Pin Power Connectors (See Warning
on Pg. 2-6.)
JPTM1 Trusted Platform Support Header
JWF1 SATA DOM (Disk_On_Module) PWR
JWOR1 Wake_On_Ring Header
KB/MS PS2 Keyboard/Mouse
LAN1/LAN2 G-bit Ethernet Ports 1/2
(IPMI) LAN IPMI_Dedicated LAN
SP1 Onboard Buzzer (Internal Speaker)
T-SGPIO 1/2 Serial_Link General Purpose I/O Headers
USB 0/1, 2/3 Back Panel USB 0/1, 2/3
USB 4/5, 6/7, 8, 10 Front Panel Accessible USB Connections
UID SW1 UID (Universal Identifi er) Switch
VGA Backpanel VGA Port
LED Description
LE1 Standby PWR LED
LE2 UID Switch LED
LEM1 BMC Heartbeat LED
Warning!
To prevent damage to the power supply or motherboard, please use a
power supply that contains a 24-pin and two 8-pin power connectors.
Be sure to connect these connectors to the 24-pin (JPW1) and the two
8-pin (JPW2,JPW3) power connectors on the motherboard. Failure in
doing so will void the manufacturer warranty on your power supply and
motherboard.
2 C Header (for an IPMI Card)
2
C Header
State Status
Green: On PWR On
Blue Unit Identifi ed
Green: Blinking BMC Normal
2-5
Chapter 2: Overview