Table of Contents
Advertisement
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue
the boot-up process. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue the boot-up procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
A-1 BIOS Error Beep Codes
Beep Code
1 beep
5 short beeps + 1 long
beep
8 beeps
1 continuous beep w/
Front Panel OH LED on
Appendix A
BIOS Error Beep Codes
BIOS Error Beep Codes
Error Message
Refresh
Memory error
Display memory
read/write error
System Overheat
A-1
Appendix A: BIOS POST Error Codes
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
1 continuous beep with the
front panel OH LED on
Hide quick links:
Advertisement
Table of Contents
