The Change Key - KERN MRS120-3 Operating Instructions Manual

4.6.3 The change key

•
Changing units
– If drying has already been performed or is under way, the unit of
measurement displayed can be changed using the change key
« ». Once a drying procedure is ended, the drying result can
be displayed in all the available units until the start of a new
drying sequence using the change key «
– Release «
» once the unit to which you wish to change is
.
displayed
4.6.4 The start/stop key
• Starting drying manually
– Ensure that there is no drying taking place, i.e. that the
instrument is in weighing mode.
– Press «START/STOP» briefly.
– The measurement is started.
• Stopping drying manually
– Drying is under way.
– Press «START/STOP» briefly.
– The measurement is stopped.
117
».
MRS-BA-defsi-0410