Connecting It To The Mains - KERN MRS120-3 Operating Instructions Manual

3.5

Connecting it to the mains

Follow safety instructions when connecting the instrument to the
mains:
The instrument may only be operated using the original mains cord
supplied.
If the mains cord supplied is not long enough, only use an extension
cord fitted with a protective earth conductor.
Plug the mains cord into a socket which has been installed in
accordance with regulations and is fitted with a PE terminal.
For technical reasons, the heating unit is designed in the factory to
accommodate a voltage of 230 V or 115 V and in accordance with
your order. Check that the setting matches the local setting?
MRS-BA-defsi-0410
DANGER
86