Safety, Standards, And Compliance; Regulatory And Model Numbers; Agency And Safety Certifications; Safety Certification - Seagate NWD-WLP4-200 User Manual

www.seagate.com
The Nytro WarpDrive 6301 card is designed for a storage and transit environment defined by the following
parameters.
Temperature range: –20 °C to +75 °C (dry bulb)

Relative humidity range: 5 % to 95 % noncondensing

3.6

Safety, Standards, and Compliance

3.6.1

Regulatory and Model Numbers

The following Regulatory and Model Numbers represent all features and configurations in this series:
Table 7 Regulatory and Model Numbers
Device Name
Nytro Warpdrive 6203
Nytro Warpdrive 6209
Nytro XP6210
Nytro Warpdrive 6301
3.6.2

Agency and Safety Certifications

Each Solid State Drive ("drives") has a product label that includes certifications that are applicable to that specific
drive. The following information provides an overview of requirements that may be applicable to the drive.
3.6.2.1

Safety certification

This drive is recognized in accordance with UL 60950-1, CSA 60950-1 and IEC/EN60950- 1 as tested by UL.
3.6.2.2

European Union (EU) CE Marking Requirements

Drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2014/30/EU) put into force on 20 April 2016. Testing is performed to the levels specified by
the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55032:2012,
Class B and the immunity levels are defined by EN 55024:2010.
The drives also meet the requirements of The Low Voltage Directive (LVD) 2014/35/EU.
Seagate drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with all
relevant regulatory requirements and standards for the drives, Seagate cannot guarantee that all system-level
products into which the drives are installed comply with all regulatory requirements and standards applicable to the
system-level products. The drive is designed for operation inside a properly designed system (e.g., enclosure designed
for the drive), with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer
manufacturers and system integrators should confirm EMC compliance and provide CE marking for the system-level
products.
For compliance with the RoHS "Recast" Directive 2011/65/EU (RoHS 2),
Substances in Electrical and Electronic
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
NOTE Because of system design and cooling capacity variations that affect
the actual airflow delivered to the Nytro WarpDrive card, the
system-level fan speeds might require adjustments to make sure the
Nytro WarpDrive card sensor temperature does not exceed 74 °C.
Regulatory Number
Equipment.
25499
25927
26410
25455
Safety, Standards, and Compliance
Model Number
ST25499
ST25927
ST26410
ST25455
Section 3.6.3.1.1, Restriction of Hazardous
29