Power Consumption For The Nytro Warpdrive 6203 Card; Nytro Xp6209 Card Characteristics - Seagate NWD-WLP4-200 User Manual

www.seagate.com
If you experience a problem with your Nytro WarpDrive 6203 card that you cannot resolve, report it to your FAE or, if
you obtained the product from an OEM, report it to the OEM. Keep these tips in mind when reporting a problem:
Clearly identify and report the revision level of the Nytro WarpDrive 6203 card. To view this information, use the

ddcli command, Option 1.
Report the part number (for example, L3-25475-xxx) listed on the label, and clearly identify the board revision.

Describe the steps leading up to the error.

Report the operating system version and the host driver version.

3.1.3

Power Consumption for the Nytro WarpDrive 6203 Card

The Nytro WarpDrive 6203 card receives power from the PCIe 12-V and 3.3-V power rails.
Use the following data for power consumption measured with the 16-KB I/O size:
12.0-V DC at 1.18 Amps (14.16 W)

3.3-V DC at 1.82 Amps (6.01 W)

3.3-V aux DC at 0.03 A (0.1 W)

3.2

Nytro XP6209 Card Characteristics

The Nytro XP6209 card uses a low-profile, half-height, and half-length PCIe board.
The Nytro XP6209 card uses a SAS2008 controller with the DirectDrive firmware that runs on its internal processor. The
controller connects to up to four embedded flash modules. You can use the Nytro WarpDrive card for either persistent
or nonpersistent data and the card offers high-performance with consistent low latency with a low host CPU and
DRAM burden.
The following figure shows the Nytro XP6209 card.
Figure 8 Nytro XP6209 Card
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
Nytro XP6209 Card Characteristics
18