Safety, Standards, And Compliance; Safety Characteristics; Electromagnetic Compliance And Standards; Standards - Seagate XF1230-1A0240 Product Manual

www.Seagate.com

7. Safety, Standards, and Compliance

7.1

Safety Characteristics

All Seagate SSDs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked with
the supplier's name or trademark, type, and UL flammability rating. A CB and UL report has been generated for
EN60950.
7.2

Electromagnetic Compliance and Standards

The Nytro XF1230 card is designed to minimize electromagnetic emissions, susceptibility to radio frequency energy,
and the effects of electrostatic discharge. The card carries the CE mark, RCM, Canadian Compliance Statement, KCC,
Taiwan BSMI, Japan VCCI, and FCC Class B, and the card is marked with the FCC Self-Certification logo. The card also
meets the requirements of CISPR Class B.
7.3

Standards

The Nytro XF1230 card is recognized in accordance with UL 60950-1 as tested by UL, CAN/CSA C22.2 No. 60950-1 and
IEC/EN60950-1 as tested by TUV SUD.
7.4

Electromagnetic Compatibility

Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. Seagate is not responsible for any radio or television
interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified
by Seagate Technology LLC. The correction of interferences caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user.
The device is tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B
Electromagnetic Compatibility Notices
Safety, Standards, and Compliance
19