www.seagate.com
3.4
Nytro WarpDrive 6301 Card Characteristics
The Nytro WarpDrive 6301 card uses a full-height PCIe board.
The Nytro WarpDrive 6301card uses a SAS2308 controller with drive firmware that runs on its internal processor. The
controller connects to up to eight embedded nonvolatile memory modules. The Nytro WarpDrive 6301 card can be
used for either persistent or nonpersistent data and offers high-performance with low latency and a low CPU burden.
The following figure shows the Nytro WarpDrive 6301 card.
Figure 12 Nytro WarpDrive 6301 Card
3.4.1
Shipping
You must always ship the Nytro WarpDrive 6301 card separately from its intended target servers. Do not ship a server
with the Nytro WarpDrive 6301 card installed.
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
Nytro WarpDrive 6301 Card Characteristics
25