Leds; Troubleshooting The Nytro Warpdrive 6301 Card - Seagate NWD-WLP4-200 User Manual

www.seagate.com
3.4.2

LEDs

Three board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for data activity, one is for drive
life, and one is for drive status. The LEDs are labeled on the bracket.
3.4.3

Troubleshooting the Nytro WarpDrive 6301 Card

The LEDs provide key status information to diagnose any problem with the Nytro WarpDrive card. You can also
contact Seagate Technology Support Services
Figure 13 Nytro WarpDrive Card LED Diagram
Table 6 Status Indicators on a Running System
Name Color
Activity Green
Life Green
Yellow
Red
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
On, blinking – Indicates data activity on the card. No action required.
On, steady – Card has sufficient life remaining for programming and erasing the Flash memory. No
action required.
On, steady – Card has approximately 10% or less of life remaining for programming and erasing the Flash
memory. Plan for replacements.
On, steady – Card has no program or erase cycles left. Data can be read, but writes are at risk. Back up data and
copy to a new Nytro WarpDrive card.
The following figure shows the LED layout.
.
LED Description
Nytro WarpDrive 6301 Card Characteristics
26