***Check the laminating length & How many laminated papers***
RESET
FAN
1. HOT LAMINATING
1. Turn the power switch on the back side of the machine.
(Emergency Switch must be turned off)
condition wouldn't work. Press the
it will revert to the previous working.
3. When machine runs, you can't change it to the
In this case, press the
machine to the
ST/BY
1. When press
length and papers laminated will be shown on
the screen.
2. When you want to return to working mode
Press
3.Also, you can reset measure mode by pressing
RESET
MEAS
LAMINATING STEPS
mode.
STOP
button the present numbers of
MEAS
MEAS
button again.
button.(for 2 second)
- 19 -
button and
ST/BY
button and turn the
mode.