UPRtek MK350S PREMIUM User Manual page 6

2.1 Preparing Before Use
Battery charging
Connect charger to charging port of this product to start charging its battery.
1. Product in off mode: The Battery Recharge LED lights red during battery charging and
turns off after it is fully charged.
2. Product in on mode: A flash symbol displays at upper right corner of screen of this
product during charging and disappears after it is fully charged.
- 7 -
2.1 Preparing Before Use
Install SD card
You may save measurement data in file of Excel (xls) format and image data (spectrum and
chromaticity coordinates diagram) in format of (JPG) in SD card with capacity at 1GB or
more.
※ Insert SD card in direction as indicated
Strap installation
Step1. Unscrew the strap.
Step2. Tie the strap to the strap hole of MK350S Premium.
Step3. Tie the strap to the sensor cover.
Step4. Screw the strap.
2
1. The SD card features a card latch design to prevent it from loosening You may feel that the SD
card is stuck when it is inserted in or removed. In case it is like this, pull or push it a little harder
to get it in place or removed. To remove SD card: Press it as shown in step ①, pull it out after
it ejecting a little as shown in step ②.
※ Press to remove SD card
1
3
1
4
- 8 -
2